Avid Seamstress Tie Blouse review


Having thoroughly enjoyed two retreats with Lisa Falconer of The Avid Seamstress, deciding to go a third time was hardly a difficult decision. They have all been at different venues, but the same wonderful formula remains the same - time for relaxed sewing, expert help and guidance, delicious food, a massage, comfortable accommodation and a wonderful group of people to share it with. This was possibly my favourite of all, but then again the most recent generally is, like my garments :)
This time we were at The Farm at Avebury, conveniently less than an hour's travel for me. The accommodation and setting was beautiful, with home-cooked food for lunches and dinners, and a special cooked breakfast.
I had managed to complete the City Trousers in the first 3 days, which left some time left over to start another project.
I had brought some fabric with me to make the Tie Blouse, one of Lisa's latest pattern releases.
I loved the loose floaty shape of the top, and the pretty details of the ribbon tie and button loops down the front.

Fit
I was able to try on a sample in size 1 (UK size 8) at the retreat which seemed to fit nicely. I wanted to use a drapey viscose, so I knew the fit wouldn't be too crucial and to expect folds of fabric which were part of the design. I therefore cut a straight size 1.

Fabric
I used a lovely soft viscose poplin from Guthrie&Ghani, one of their own designs from the Bee Happy Blooms range. I bought the navy colourway, but they also have cream and teal.
Cutting out
Making sure the pattern was cut accurately on the grainline was something that Lisa really emphasised, in particular the front piece and front facings. These pieces are one long piece from the shoulder seam to the end of the tie, creating plenty of room for error with shifty viscose. In addition, the facing pieces would ideally be interfaced so this would need to be cut and applied precisely too. It was this facing that would be most prone to errors so we discussed various ways of ensuring accuracy:
Do not use interfacing
This would avoid a mismatch between the fabric and interfacing pieces, but given my drapey viscose, I preferred to have the support of the interfacing.
The traditional way of cutting the fabric and interfacing separately and then fusing
This would work but with several pieces being cut separately, I was nervous of errors creeping in. I would need to keep laying over the original paper pattern to ensure accuracy, but errors would only be obvious at the end once the pieces were fused.
Block fusing and then cutting the pieces
This is the method recommended in the instructions, but we discussed the potential pitfalls. The ironing board would not be large enough to hold the fabric flat and square for block fusing. This is an option that may have been possible with access to a large table and pressing mat or towel, so I would have considered this if at home.
Cutting the fabric, laying each piece on interfacing, fusing and then cutting out
This is what I opted for in the end, using the following steps.
Mark additional grainlines
As suggested by Lisa, I drew additional parallel grainlines on the facing piece to ensure the tie would continue to be in line.

Cut the fabric pieces
I cut the two fabric facing pieces together with the fabric folded, although this could have been done twice in single layer if needed.
Lay fabric piece onto interfacing
I then lay interfacing on the ironing board with the glue side facing up. I took one of the facing pieces and lay this on top with right side up, in a way that most of the piece would fit flat onto the board. This was more relevant for the long front facing, but the photo below demonstrates this with the back facing piece.

Fuse interfacing through paper piece
Once the fabric facing was laid on the interfacing, I took the paper pattern piece and lay it on top, adjusting the fabric until it matched the shape. I used the tip or side of the iron to fuse the fabric and interfacing together in as many places as I could, placing it on top of the paper to ensure nothing had shifted. It was important to keep the iron away from any other part of the interfacing as it would stick to the iron and shift when moving it.

Once I felt it was a little more secure, I took away the paper piece and fused it further by placing the iron directly on the fabric.
Cut interfacing
I then cut the interfacing around the fabric piece, trying not to disturb the layout in case it was only lightly fused.

Finish fusing
I completed fusing by pressing over the fabric, and then turning it over to press directly onto the interfacing.
These steps were repeated for each of the 4 facing pieces.
Construction
Ribbon ties
When handsewing the ribbon ties down the front and centre back, I wanted them to remain perpendicular to the raw edge so used a cross stitch to secure them.

When it came to sewing the facing to the main garment over these ribbon loops, I pinned them in place for additional security as described in the Facing section.

Waist ties
I was keen to reduce the length of the waist ties as I felt they looked a little long in proportion to my body. I was considering reducing the width as well but wanted to see how the entire thing came together first before potentially planning this on a future version.
I reduced the length of the waist ties by 10cm by laying on the original pattern piece 10cm short of the end and drawing around it, making sure the pointed tip was still halfway along the width.
Facing
Before sewing the facing to the main garment, I pinned the ribbons perpendicular to the raw edge to help secure them in this arrangement. I also held the long back neck ties in this direction while sewing.

Hems
I love a handstitched hem, so used a catchstitch on the garment and sleeve hems.

Buttons
Lisa had brought a great selection of haberdashery to the retreat, which meant I had ribbon and buttons that matched the coral shade of some of the flowers. I sewed the top button, did it up and then marked the spot for the second button down and carried on in this way. It was something I remember Lisa recommending at a previous retreat as a more accurate way of making sure the buttons and buttonholes or loops lined up without pulling.

Repair of torn tibbon tie
I was so excited having finished the top, that I wore it the following evening for a meal out. I wanted to ensure the ribbon tie looked nice and even at the back, so tied this in a bow first and then slipped the top over my head without undoing any of the buttons. I did the same to remove the top, and then discovered I had pulled too much on the ribbon which had started to fray and come loose from the garment.
It sat on my sewing table for a couple of weeks haunting me and filling me with regret, until I decided to pick it up and make it wearable again.
I unpicked the seam and removed the ribbon.

I cut off the frayed section of the ribbon, applied some adhesive with a Sewline glue pen to hold it in place temporarily, and inserted it back into the seam, pinching it together for the glue to hold.

I handstitched the seam to secure it again.

I then reinforced it with a bar tack over the top, with matching thread colour to make it less obvious. This felt much more secure when I tugged on it.

Summary
This is a lovely going out top, of which I definitely need more of in my wardrobe, and I just adore a floral fabric :)
What I love
I love all the little details of this top - the buttons on the front with ribbon loops, the pretty ribbon tie on the back, and the waist ties at the front
The floaty sleeves looks great in viscose
It's a smart casual top suitable for a night out without looking too formal or fancy
What I would change
I might make the top a touch longer if sewing it again. It looks great when standing up, but shows a lot of my back when sitting down.
Although it's meant to be a loose style, the front hangs slightly oddly on me. I might consider fitting it more to my figure, or using a bust dart to remove some of the excess. I could also try the next size down.
What I discovered
Sometimes you just need an easy project that goes smoothly, and this hit the spot. I have returned from some retreats halfway through a garment but then not found the time or energy to complete it until months later, if at all. This was a simple project which was easy to pick up again once home.
Listening to Lisa's advice on cutting this fabric with precision will make me that little bit more careful the next time I use a similar drapey fabric.
Find me on Instagram, Facebook, YouTube, Bloglovin' or scroll to the bottom to subscribe to my newsletter which is published every month.
Links
I have no affiliations, I'm just a keen buyer and user. A UK supplier may be linked, please try to source items from your favourite independent stores.
























































Your blouse is lovely! Thanks for sharing so much of what you learn with each make…helpful and encouraging for those of us looking over your shoulder. Great save on the ribbon repair…I would have let it sit for months feeling defeated, but this is so much better being in service in your closet… Chris in Florida